|
|
With over 17 years of experience assisting contractors in the construction trades to obtain Alabama State License. Contractor School Online (CSO) is your primary resource to help you pass your Alabama State Contractor License Tests, Alabama Online Practice Tests, Updated Study Guides, CD’s and more!
Contractor’s School Online (CSO), have many professional consultants that have years of experience in the construction field or law. CSO’s Professional Consultants will assist Contractors with Practice Tests Online, 24/7, three months access, Business, Law and Management, plus Construction Trades. Pass your State Contractor License Exams, 1-800-966-9596
|
To become a certified contractor in Alabama, depending on the trade you are interested in, you may be required to pass both Construction Trade Exams and Alabama Business, Law and Management.
If purchases are made elsewhere make sure you receive the correct author, title and year this appropriate for the trade and Business, Law and Management. Use our
Information Request Form
to find out more.
CSO Business, Law and Management Practice Test coincides
with the required State Contractor’s Manual.
Please note: Inventory
Pricing - Contractors State Bonding and Subjects may change
without notice.
($75)
Content
-
Alabama-AL-Business, Law and Management Online Practice Test
-
3 Months Access, Available 24/7
|
|
($48.50)
Content
-
Alabama-AL-Business, Law and Management Manual
|
|
($113.50)
-
Alabama-AL-Business, Law and Management Online Practice Test
-
3 Months Access, Available 24/7
-
Alabama-AL-Business, Law and Management Manual
|
|
($85)
Content
|
Sample
-
Alabama-AL-Electrical License Online Practice Test
-
3 Months Access, Available 24/7
|
|
($85)
Content
-
Alabama-AL-General Carpentry License Online Practice Test
-
3 Months Access, Available 24/7
|
|
($85)
Content
-
Alabama-AL HVAC-Heating and Air Conditioning License Online Practice Test
-
3 Months Access, Available 24/7
|
|
($85)
Content
-
Alabama-AL-Low Voltage License Online Practice Test
-
3 Months Access, Available 24/7
|
|
($85)
Content
-
Alabama-AL-Millwork, Cabinets and Finish Carpentry License Online Practice Test
-
3 Months Access, Available 24/7
|
|
($85)
Content
-
Alabama-AL-Painting and Decorating License Online Practice Test
-
3 Months Access, Available 24/7
|
|
($85)
Content
-
Alabama-AL-Plumbing License Online Practice Test
-
3 Months Access, Available 24/7
|
|
($85)
Content
-
Alabama-AL-Residential Home Builders and Remodelers License Online Practice Test
-
3 Months Access, Available 24/7
|
|
($150)
-
Alabama-AL-Electrical License Online Practice Test
-
Alabama-AL-Business, Law and Management Online Practice Test
-
3 Months Access, Available 24/7
|
|
($193.50)
-
Alabama-AL-Electrical License Online Practice Test
-
Alabama-AL-Business, Law and Management Online Practice Test
-
3 Months Access, Available 24/7
-
Alabama-AL-Business, Law and Management Manual
|
|
($150)
-
Alabama-AL-Business, Law and Management Online Practice Test
-
Alabama-AL-General Carpentry License Online Practice Test
-
3 Months Access, Available 24/7
|
|
($193.50)
-
Alabama-AL-General Carpentry License Online Practice Test
-
Alabama-AL-Business, Law and Management Online Practice Test
-
3 Months Access, Available 24/7
-
Alabama-AL-Business, Law and Management Manual
|
|
($150)
-
Alabama-AL-Heating and Air Conditioning License Online Practice Test
-
Alabama-AL-Business, Law and Management Online Practice Test
-
3 Months Access, Available 24/7
|
|
($193.50)
-
Alabama-AL-Heating and Air Conditioning License Online Practice Test
-
Alabama-AL-Business, Law and Management Online Practice Test
-
3 Months Access, Available 24/7
-
Alabama-AL-Business, Law and Management Manual
|
|
($150)
-
Alabama-AL-Low Voltage License Online Practice Test
-
Alabama-AL-Business, Law and Management Online Practice Test
-
3 Months Access, Available 24/7
|
|
($193.50)
-
Alabama-AL-Low Voltage License Online Practice Test
-
Alabama-AL-Business, Law and Management Online Practice Test
-
3 Months Access, Available 24/7
-
Alabama-AL-Business, Law and Management Manual
|
|
($150)
-
Alabama-AL-Painting and Decorating License Online Practice Test
-
Alabama-AL-Business, Law and Management Online Practice Test
-
3 Months Access, Available 24/7
|
|
($193.50)
-
Alabama-AL-Painting and Decorating License Online Practice Test
-
Alabama-AL-Business, Law and Management Online Practice Test
-
3 Months Access, Available 24/7
-
BAlabama-AL-usiness, Law and Management Manual
|
|
($150)
-
Alabama-AL-Business, Law and Management Online Practice Test
-
Alabama-AL-Plumbing License Online Practice Test
-
3 Months Access, Available 24/7
|
|
($193.50)
-
Alabama-AL-Business, Law and Management Online Practice Test
-
Alabama-AL-Plumbing License Online Practice Test
-
3 Months Access, Available 24/7
-
Alabama-AL-Business, Law and Management Manual
|
|
($150)
-
Alabama-AL-Residential Home Builders and Remodelers License Online Practice Test
-
Alabama-AL-Business, Law and Management Online Practice Test
-
3 Months Access, Available 24/7
|
|
($193.50)
-
Alabama-AL-Residential Home Builders and Remodelers License Online Practice Test
-
Alabama-AL-Business, Law and Management Online Practice Test
-
3 Months Access, Available 24/7
-
Alabama-AL-Business, Law and Management Manual
|
|
ALABAMA STATE
TRADES, EXAMS and SUMMARY INFORMATION
Marine Construction
Building Construction (Commercial)
Masonry
Building Contractor Under Four Stories
Metal Building Erection
Carpentry and Framing
Metal Stud and Drywall
Commercial Swimming Pool
Millwork and Finish Carpentry
Concrete
Municipal and Utility
Concrete Pavement
Oil and Gas Fields
Conveying
Painting and Wall Covering
Doors, Windows, and Glass with Specialty Hardware
Pipelines
Drainage and Culvert
Power Projects and Plants
Drainage, Irrigation, and Flood Control
Pre-cast and Pre-stressed Concrete
Elevator and Escalator
Remodeling, Alteration, and Maintenance
Erosion Control and Mowing
Roofing and Sheet Metal
Foundations, Pilings, and Cofferdams with Retaining Walls
Runway
Gas and Oil Projects
Sewer Projects
Hard Tile and Stone
Sitework
Heavy Railroad Construction
Special Coatings and Waterproofing
Highways and Streets
Structural and Misc. Steel
Hot and Cold Asphalt Plant Mix Paving Contractor
Telecommunications
Insulation
Tunnel
Lath and Plaster
Water Projects
Low Voltage Special Systems (under 50 volts)
ELIGIBILITY
All
eligibilities are valid for 1 year from the date that the application is received by the state. If you do not pass the examination within the 1 year period, you must re-apply with the state. You may take the examination an unlimited number of times during the 1 year period.
REQUIRED IDENTIFICATION AT EXAMINATION SITE
You must provide 2 forms of identification. One must be a VALID form of government issued identification (driver’s license, state ID, passport), which bears your signature and has your photograph. The second ID must have your signature and preprinted legal name. All identification provided must match the name on the Examination Registration Form and your Registration.
TIPS FOR PREPARING FOR YOUR LICENSE EXAMINATION
1. The following suggestions will help you prepare for your examination.
2. Read study materials that cover all the topics in the content outline.
3. Take notes on what you study. Putting information in writing helps you commit it to memory and it is also an excellent business practice. Underline or highlight key ideas that will help with a later review.
4. Discuss new terms or concepts as frequently as you can with colleagues. This will test your understanding and reinforce ideas.
5. Your studies will be most effective if you study frequently, for periods of about 45 to 60 minutes. Concentration tends to wander when you study for longer periods of time.
GENERAL CONTRACTORS
Take your state examination:
Must bring two forms of identification, which bear your signature and one of these must also have your photograph to take your state exam.
ALABAMA GENERAL CONTRACTOR EXAMINATION
Contact: Contractor School Online
Building Construction (Commercial), Highways and Streets Contractor, Municipal and Utility Contractor, Heavy Railroad Construction.
Business, Law and Management (formerly General Contractor)
EXAMINATION CONTENT OUTLINE
BUSINESS, LAW and MANAGEMENT EXAMINATION
(FORMERLY GENERAL CONTRACTOR EXAMINATION)
(Required of all General Contractors)
Number of Questions
Minimum Passing Score
Time Allowed
50 70% 120 Minutes
CONTENT OUTLINE
Subject Area
Number of Items
Licensing 8
Estimating and Bidding 5
Liens 2
Financial 5
Payroll and Taxes 6
Personnel and Labor 5
Project Management 3
Contracts 6
Business Organization 2
Risk Management 4
Safety Recordkeeping and Environmental 4
REFERENCE LIST
The reference material listed below was used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed. This examination is OPEN BOOK.
The following reference material is allowed in the examination center.
Contact
: Contractor School Online to order the manuals you may need with correct author and year.
1. Business, Law and Management Manual
BUILDING CONSTRUCTION (COMMERCIAL)
Number of Questions
Minimum Passing Score
Time Allowed
115 81 330 Minutes
CONTENT OUTLINE
Subject Area
Number of Items
Estimating, Bidding, and Preconstruction
Services 23
Project Management 28
Project Construction 32
Project Closeout 9
Business and Financial Management 23
REFERENCE LIST
The reference material listed below was used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed. This examination is OPEN BOOK.
The following reference material is allowed in the examination center.
Contact: Contractor School Online to order the manuals you may need with correct author and year.
1. Restraining, and Bracing of Metal Plate Connected Wood Trusses
2. Construction Management
3. Business, Law and Management
4. Erectors' Manual
5. Field Personnel for Un-bonded Post-Tensioning
6. Management of Construction
7. Steel Deck
8. Pipe and Excavation
9. Gypsum Construction
10. Placing Reinforcing Bars, Recommended Practices
11. Erection of Steel Joists and Joist Girders
12. Masonry - Brick, Block, Stone
13. Principles of Commercial Construction
14. Federal Regulations
15. Carpentry and Building Construction
16. Accessible and Usable Buildings and Facilities
17. Roofing Construction and Estimating
18. Concrete Construction
BUILDING CONTRACTOR UNDER FOUR STORIES
Number of Questions
Minimum Passing Score
Time Allowed
90 70% (63 correct) 230 Minutes
CONTENT OUTLINE
Subject Area
Number of Items
Sitework, Footings and Foundation 8
Concrete and Concrete Reinforcement 8
Metals 5
Masonry 6
Carpentry 16
Roofing 10
General Code and Construction
Knowledge 20
Associated Trades 10
OSHA Safety 7
REFERENCE LIST
The reference material listed below was used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed. This examination is OPEN BOOK.
The following reference material is allowed in the examination center.
Contact:
Contractor School Online to order the manuals you may need with correct author and year.
1. Federal Regulations
2. Carpentry and Building Construction
3. Bracing of Metal Plate Connected Wood Trusses
4. Concrete Construction
5. Masonry - Brick, Block, Stone
6. Pipe and Excavation Contracting
7. Gypsum
8. Steel Joists and Joist Girders
9. Steel Deck
10. Energy Conservation
11. International Building Code
12. Residential One-and-Two-Family Dwellings
13. Building Code for Masonry Structures
14. Code for Structural Concrete
CARPENTRY AND FRAMING CONTRACTOR
Number of Questions
Minimum Passing Score
Time Allowed
60 70% (42 correct) 180 Minutes
CONTENT OUTLINE
Subject Area
Number of Items
Estimating and Plan Reading 9
Layout 7
Walls 14
Floors and Stairs 13
Roofs 12
OSHA Safety 5
REFERENCE LIST
The reference materials listed below were used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed. This examination is OPEN BOOK.
The following reference material is allowed in the examination center.
Contact
: Contractor School Online to order the manuals you may need with correct author and year.
1. International Building Code
2. Residential Code for One-and-Two-Family Dwellings
3. Carpentry and Building Construction
4. Federal Regulations
COMMERICIAL SWIMMING POOL CONTRACTOR
Number of Questions Minimum
Passing Score
Time Allowed
50 70% (35 correct) 150 Minutes
CONTENT OUTLINE
Subject Area
Number of Items
Plan Reading and Estimating 3
Sitework and Excavating 9
Forming and Reinforcing 9
Concrete 8
Shotcrete 8
Pool Equipment, Including ADA (No Plumbing or Electric) 8
Safety, Including CFR, Pool and Security Fencing 5
REFERENCE LIST
The reference materials listed below were used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed. This examination is OPEN BOOK.
The following reference material is allowed in the examination center.
Contact
: Contractor School Online to order the manuals you may need with correct author and year.
1. International Building Code
2. International Residential Code
3. Federal Regulations
4. Certified Pool-Spa Operators
5. Concrete Mixtures
6. Reinforcing Bars, Recommended Practices
7. Shotcrete
8. Pipe and Excavation
CONCRETE CONTRACTOR
Number of Questions
Minimum Passing Score
Time Allowed
60 70% (42 correct) 150 Minutes
CONTENT OUTLINE
Subject Area
Number of Items
Estimating and Plan Reading 10
Layout and Excavation 12
Formwork 8
Reinforcing Steel 8
General Concrete 16
Safety 6
REFERENCE LIST
The reference materials listed below were used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed. This examination is OPEN BOOK.
The following reference material is allowed in the examination center. Contact:
Contractor School Online to order the manuals you may need with correct author and year.
1. Federal Regulations
2. Concrete Mixtures
3. Pipe and Excavation Contracting
4. International Building Code
5. Residential Code for One-and-Two-Family Dwellings
6. Formwork for Concrete
7. Reinforcing Bars, Recommended Practices
8. Code Requirements for Structural Concrete and Commentary
CONCRETE PAVEMENT CONTRACTOR
Number of Questions
Minimum Passing Score
Time Allowed
100 70% (70 correct) 240 Minutes
CONTENT OUTLINE
Subject Area # of
Items
Water and Sewer 16
Gas 8
Paving 12
Excavation, Compaction, and Grading 12
Safety 7
Steel 12
Piles 4
Concrete 17
Traffic Control 3
Welding 6
Alabama Dig Safely 3
REFERENCE LIST
The reference materials listed below were used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed. This examination is OPEN BOOK.
The following reference material is allowed in the examination center.
Contact
: Contractor School Online to order the manuals you may need with correct author and year.
1. Reinforcing Bars, Recommended Practices
2. Federal Regulations
3. Installation Ductile Iron Pipe
4. Pipe and Excavation Contracting
5. Pipe Welding Procedures
6. Hot Mix Asphalt Paving
7. Pipefitter's Handbook
8. Erection of Steel Joists and Joist Girders
9. Code for Pressure Piping
10. Training and Certification of Steel Personnel for Unbonded Post-Tensioning
11. Concrete Pipe & Box Culvert
12. Concrete Mixtures
13. Formwork for Concrete
14. Alabama Dig Safely
THESE REFERENCES WILL NOT BE AVAILABLE IN THE EXAMINATION CENTER.
CONVEYING CONTRACTOR
Number of Questions
Minimum Passing Score
Time Allowed
40 70% (28 correct) 120 Minutes
CONTENT OUTLINE
Subject Area
Number of Items
Installation 12
Systems and Equipment 8
Tools and Fasteners 5
Safety 4
Maintenance and Troubleshooting 4
Electrical 3
Welding 4
REFERENCE LIST
The reference materials listed below were used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed. This examination is OPEN BOOK.
The following reference material is allowed in the examination center.
Contact
: Contractor School Online to order the manuals you may need with correct author and year.
1. Contren Learning Series - Conveyors,
2. Contren Learning Series - Troubleshooting and Repairing Conveyors
3. Modern Welding
4. Federal Regulations
5. Specification for Structural Joints Using ASTM A325 or A490 Bolts
6. Safety Standard for Conveyors and Related Equipment
THESE REFERENCES WILL NOT BE AVAILABLE IN THE EXAMINATION CENTER.
DOORS, WINDOWS, AND GLASS WITH SPECIALTY HARDWARE CONTRACTOR
Number of Questions
Minimum Passing Score
Time Allowed
60 70% (42 correct) 150 Minutes
CONTENT OUTLINE
Subject Area
Number of Items
General Glazing 10
Glass Systems 10
Metal Framing 4
Plastics / Acrylics 3
Sealant Installations 3
Safety 4
Code Requirements 6
Doors and Frames 10
Hardware 6
Special Doors 2
Overhead Garage Doors 2
REFERENCE LIST
The reference materials listed below were used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed. This examination is OPEN BOOK.
The following reference material is allowed in the examination center.
Contact
: Contractor School Online to order the manuals you may need with correct author and year.
1. Federal Regulations
2. International Building Code
3. Residential Code for One- and-Two-Family Dwellings
4. Carpentry and Building Construction
5. Glass Installer Reference Manual
6. Glass & Glazing Requirements of the Model Building Codes
THESE REFERENCES WILL NOT BE AVAILABLE IN THE EXAMINATION CENTER.
DRAINAGE AND CULVERT CONTRACTOR
Number of Questions
Minimum Passing Score
Time Allowed
30 70% (21 correct) 75 Minutes
CONTENT OUTLINE
Subject Area
Number of Items
Earthwork/Surveying 8
Concrete 5
Curbs and Gutters 5
Culverts 3
Alabama Dig Safely 5
Heavy Equipment/Safety 4
REFERENCE LIST
The reference materials listed below were used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed. This examination is OPEN BOOK.
The following reference material is allowed in the examination center.
Contact
: Contractor School Online to order the manuals you may need with correct author and year.
1. Alabama Dig Safely
2. Federal Regulations
3. Concrete Mixtures
4. Pipe and Excavation Contracting
5. Construction of Urban Storm Water Management Systems
THESE REFERENCES WILL NOT BE AVAILABLE IN THE EXAMINATION CENTER.
DRAINAGE, IRRIGATION AND FLOOD CONTROL CONTRACTOR
Number of Questions
Minimum Passing Score
Time Allowed
45 70% (32 correct) 120 Minutes
CONTENT OUTLINE
Subject Area
Number of Items
Sitework 11
Concrete 10
Curbs and Gutters 4
Culverts 3
Alabama Dig Safely 3
Heavy Equipment/Safety 4
Irrigation 10
REFERENCE LIST
The reference materials listed below were used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed. This examination is OPEN BOOK.
The following reference material is allowed in the examination center.
Contact
: Contractor School Online to order the manuals you may need with correct author and year.
1. Alabama Dig Safely
2. Federal Regulations
3. Pipe and Excavation Contracting
4. Irrigation Design
5. Concrete Mixtures
6. Construction of Urban Storm Water Management Systems
THESE REFERENCES WILL NOT BE AVAILABLE IN THE EXAMINATION CENTER.
ELECTRICAL CONTRACTOR
General Testing Information
The Alabama Electrical Contractors Testing Center, has developed, and administered their licensing examination program for state licensed Electrical Contractors and Electrical Journeyman. This has been developed to help explain the rules and processes you will need to undertake to complete the testing requirement for your Electrical Contractors and Electrical Journeyman licenses.
Alabama law requires that each individual who is engaged in the electrical contracting business or performing work as an Electrical Contractor or Electrical Journeyman to be licensed. To become licensed, an individual must first complete the appropriate application.
Examination Categories
All exams are open book and are timed.
1. Electrical Contractor
2. Electrical Journeyman
State of Alabama Electrical Contractor Exam Descriptions
"Electrical Contractor" means a person who engages in the business of contracting to install, erect, repair or alter electrical equipment for the generation, transmission or utilization of electrical energy and work incidental to the undertaking.
Open Book
Number of Questions 110
Time allowed (hours) 5
Subject Area
Number of Questions
General Electrical Knowledge 10
Service, Feeders, and Branch Circuits 10
Grounding and Bonding 9
Conductors and Cables 10
Raceways and Boxes 8
Special Occupancies and Equipment 4
Electrical Power 3
Motors 6
Low Voltage 2
Lighting 3
Illuminated Signs 2
Fire Detection and Alarm Systems 2
Safety Information 5
Overcurrent Protection 6
Business Organization 1
Risk Management 2
Project Management 2
Estimating 4
Safety and Environmental 2
Labor Laws 3
Tax Laws 4
Financial Management 4
Contracts 3
Lien Law 1
Licensing Law 4
Electrical Journeyman
Those qualified to perform work in the electrical trades while employed or supervised by an Electrical Contractor.
Open Book
Number of Questions 80
Time allowed (hours) 4
Subject Area
Number of Questions
General Electrical Knowledge 10
Service, Feeders, and Branch Circuits 9
Grounding and Bonding 8
Conductors and Cables 10
Raceways and Boxes 10
Special Occupancies and Equipment 6
Electrical Power 2
Motors 6
Low Voltage 2
Lighting 3
Illuminated Signs 2
Fire Detection and Alarm Systems 2
Safety Information 5
Overcurrent Protection 5
ELEVATOR AND ESCALATOR CONTRACTOR
Number of Questions
Minimum Passing Score
Time Allowed
50 70% (35 correct) 120 Minutes
CONTENT OUTLINE
Subject Area
Number of Items
Wire Rope 2
Clearance and Space Limits 6
Electrical 6
Testing 3
Engineering and Inspection 5
Safety Devices 8
Controls 3
Operating Limitations 2
Drive Mechanisms 3
Fire Service 3
Maintenance and Repairs 5
Escalators and Dumbwaiter 2
Emergency Power 2
REFERENCE LIST
The reference materials listed below were used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed. This examination is OPEN BOOK.
The following reference material is allowed in the examination center.
Contact
: Contractor School Online to order the manuals you may need with correct author and year.
1. Safety Code for Elevators and Escalators
2. Safety Code for Existing Elevators and Escalators
3. Elevator and Escalator Electrical Equipment
4. National Electrical Code
5. National Elevator Manufacturing Industry's Installation
6. Safety Code for Elevators and Escalators
THESE REFERENCES WILL NOT BE AVAILABLE IN THE EXAMINATION CENTER.
EROSION CONTROL AND MOWING CONTRACTOR
Number of Questions
Minimum Passing Score
Time Allowed
40 70% (28 correct) 120 Minutes
CONTENT OUTLINE
Subject Area
Number of Items
Trees and Shrubs 8
Grass and Ground Cover 10
Drainage and Grading 7
Hardscaping 6
Regional Plants 5
Soils and Amendments 4
REFERENCE LIST
The reference materials listed below were used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed. This examination is OPEN BOOK.
The following reference material is allowed in the examination center. Contact:
Contractor School Online to order the manuals you may need with correct author and year.
1. Landscaping Principles and Practices
2. Tough-As-Nails flowers for the South
3. Landscape Construction
THESE REFERENCES WILL NOT BE AVAILABLE IN THE EXAMINATION CENTER.
FOUNDATIONS, PILINGS, AND COFFERDAMS WITH RETAINING WALLS CONTRACTOR
Number of Questions
Minimum Passing Score
Time Allowed
50 70% (35 correct) 130 Minutes
CONTENT OUTLINE
Subject Area
Number of Items
Excavation and Grading 8
Piles 4
Concrete 6
Metals including Concrete Reinforcement 5
Heavy Equipment/Safety 4
Alabama Dig Safely 3
Erosion and Sedimentation Control 6
Tunneling 4
Concrete Formwork 4
Pre-Cast Pre-Stressed Concrete Erecting 6
REFERENCE LIST
The reference materials listed below were used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed. This examination is OPEN BOOK.
The following reference material is allowed in the examination center.
Contact
: Contractor School Online to order the manuals you may need with correct author and year.
1. Federal Regulations
2. Construction Planning, Equipment, and Methods
3. Pipe and Excavation Contracting
4. Concrete Mixtures
5. Reinforcing Bars, Recommended Practices
6. Training and Certification of Field Personnel for Unbonded Post-Tensioning
7. Jacked Tunnel Design and Construction
8. Alabama Dig Safely
9. Storm Water Management for Construction
10. Formwork for Concrete
11. Guidelines for the Erection of Pre-Cast Concrete Products
THESE REFERENCES WILL NOT BE AVAILABLE IN THE EXAMINATION CENTER.
GAS AND OIL PROJECTS CONTRACTOR
Number of Questions
% Required to Pass
Time Allowed
50 70 (35 Correct) 120 Minutes
CONTENT OUTLINE
Subject Area
Number of Items
Excavation 16
Tank Installation and Testing 14
Piping. Pumps and Controls 5
Troubleshooting and Maintenance 4
Safety and Fire Prevention 8
Leak Detection and Monitoring Systems 3
REFERENCE LIST
The reference material listed below was used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed. This examination is OPEN BOOK.
The following reference materials are allowed in the examination center.
Contact
: Contractor School Online to order the manuals you may need with correct author and year.
1. Combustible Liquids Codes
2. Codes for Motor Fuel Dispensing Facilities and Repair Garages
3. Recommended Practices for Installation of Underground Liquid Storage Systems
4. Recommended Practices for Installation of Aboveground Storage Systems for Motor Vehicle Fueling Petroleum Equipment
5. Electrical Continuity Recommended Procedure for Testing of Electrical Continuity of Fuel-Dispensing Hanging Hardware
6. Definitive dictionary of terms used in petroleum marketing operations
7. Federal Regulations
8. Pipe and Excavation Contracting
9. Alabama Dig Safely
THESE REFERENCES WILL NOT BE AVAILABLE IN THE EXAMINATION CENTER.
HARD TILE AND STONE CONTRACTOR
Number of Questions
% Required to Pass
Time Allowed
50 70 (35 Correct) 120 Minutes
CONTENT OUTLINE
Subject Area
Number of Items
General Knowledge 4
Plan Reading 4
Exterior Tile Installation 4
Tile Cutting and Drilling 2
Indoor Tile Installation 15
Shower Pans (Including Seats, Shelves,
Accessories, and Troubleshooting) 10
Shower or Tub Installation 3
Tile and Marble Restoration 2
Safety and Employee Protection 6
REFERENCE LIST
The reference material listed below was used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed. This examination is OPEN BOOK.
The following reference materials are allowed in the examination center.
Contact
: Contractor School Online to order the manuals you may need with correct author and year.
1. Federal Regulations
2. Guide to Floors
3. Setting Tile
4. National specifications for the Installation of Ceramic Tile
THESE REFERENCES WILL NOT BE AVAILABLE IN THE EXAMINATION CENTER.
HEAVY RAILROAD CONSTRUCTION CONTRACTOR
Number of Questions
% Required to Pass
Time Allowed
50 70% (35 Correct) 120 Minutes
CONTENT OUTLINE
Subject Area
Number of Items
Erosion and Sedimentation Control 2
Track Construction 5
Concrete Railway Structures 3
Safety 7
Sitework 5
Alabama Dig Safely 2
Estimating 2
Welding 2
Tunnelling 3
Concrete 7
Metals Including Concrete Reinforcement 3
Piles 5
Pre-Cast and Pre-Stressed Concrete Erecting 4
REFERENCE LIST
The reference material listed below was used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed. This examination is OPEN BOOK.
The following reference materials are allowed in the examination center.
Contact
: Contractor School Online to order the manuals you may need with correct author and year.
1. Federal Regulations
2. Alabama Dig Safely
3. Storm Water Management for Construction
4. Track Safety Standards, Railroad Workplace Safety, Rules, Standards, Instructions Governing the Installation, Inspection, Maintenance, and Repair of Signal and Train Control Systems, Devices, and Appliances
5. Guide to Railway Engineering
6. Field Handbook for Concrete Railway Structures
7. Pipe and Excavation Contracting
8. Concrete Mixtures
9. Reinforcing Bars, Recommended Practices
10. Guidelines for the Erection of Pre-Cast Concrete Products
11. Construction Planning, Equipment, and Methods
THESE REFERENCES WILL NOT BE AVAILABLE IN THE EXAMINATION CENTER.
HIGHWAYS AND STREETS CONTRACTOR
Number of Questions
% Required to Pass
Time Allowed
80 70% (56 Correct) 220 Minutes
CONTENT OUTLINE
Subject Area
Number of Items
Paving-Asphalt 16
Piles 5
Excavation and Grading 12
Concrete Paving 3
Safety 5
Alabama Dig Safely 3
Traffic Control 2
Concrete 8
Metals including Concrete Reinforcement 6
Erosion and Sedimentation Control 6
Tunneling 8
Project Management and Estimating 6
REFERENCE LIST
The reference material listed below was used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed. This examination is OPEN BOOK.
The following reference materials are allowed in the examination center.
Contact
: Contractor School Online to order the manuals you may need with correct author and year.
1. Federal Regulations
2. Construction Planning, Equipment, and Methods
3. Pipe and Excavation Contracting
4. Concrete Mixtures
5. Hot-Mix Asphalt Paving
6. Reinforcing Bars, Recommended Practices
7. Training and Certification of Field Personnel for Un-Bonded Post-Tensioning
8. Jacked Tunnel Design and Construction
9. Alabama Dig Safely
10. Storm Water Management for Construction Activities
11. Uniform Traffic Control Devices for Streets and Highways
THESE REFERENCES WILL NOT BE AVAILABLE IN THE EXAMINATION CENTER.
HOT AND COLD ASPHALT PLANT MIX PAVING CONTRACTOR
Number of Questions
% Required to Pass
Time Allowed
30 70% (21 Correct) 90 Minutes
CONTENT OUTLINE
Subject Area
Number of Items
Bituminous Surface Treatments and Pavements 16
Traffic Control Devices 4
Portland Cement Surface Treatments and
Pavements 5
Heavy Equipment/Safety 5
REFERENCE LIST
The reference material listed below was used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed. This examination is OPEN BOOK.
The following reference materials are allowed in the examination center.
Contact
: Contractor School Online to order the manuals you may need with correct author and year.
1. Federal Regulations
2. Asphalt in Pavement Maintenance
3. Hot-Mix Asphalt Paving
4. Uniform Traffic Control Devices for Streets and Highways
5. Concrete Mixtures
THESE REFERENCES WILL NOT BE AVAILABLE IN THE EXAMINATION CENTER.
INSULATION CONTRACTOR
Number of Questions
Minimum Passing Score
Time Allowed
50 70% (35 correct) 120 Minutes
CONTENT OUTLINE
Subject Area
Number of Items
General Knowledge and Theory 8
Plan Reading, Materials, Estimating, and Take-
Offs 5
Spray-On Application 4
Batt/Roll Insulation 4
Blown or Loose-Fill Insulation (Includes Dense-
Packing) 4
Rigid-Board and Reflective Insulation 2
Ventilation 5
Vapor Barrier and Retarders 4
Safety and Employee Protection 8
Other Insulation Applications 6
REFERENCE LIST
The reference materials listed below were used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed. This examination is OPEN BOOK.
The following reference material is allowed in the examination center.
Contact
: Contractor School Online to order the manuals you may need with correct author and year.
1. Residential Code for One-and-Two-Family Dwellings
2. Federal Regulations
3. Insulation Book
4. Carpentry and Building Construction
THESE REFERENCES WILL NOT BE AVAILABLE IN THE EXAMINATION CENTER.
LATH AND PLASTER CONTRACTOR
Number of Questions
Minimum Passing Score
Time Allowed
45 70% (32 correct) 120 Minutes
CONTENT OUTLINE
Subject Area # of
Items
Safety 5
Surface Preparation and Setup 10
Drywall 5
Stucco 5
Application and Installation 8
Base and Finish Coat 7
Plaster and Lathe 5
REFERENCE LIST
The reference materials listed below were used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed. This examination is OPEN BOOK.
The following reference material is allowed in the examination center.
Contact
: Contractor School Online to order the manuals you may need with correct author and year.
1. Plastering Skills
2. Federal Regulations
3. Gypsum Construction
4. Portland Cement Plaster (Stucco)
THESE REFERENCES WILL NOT BE AVAILABLE IN THE EXAMINATION CENTER.
LOW VOLTAGE SPECIAL SYSTEMS (UNDER 50 VOLTS)
Number of Questions
Minimum Passing Score
Time Allowed
50 70% (35 correct) 120 Minutes
CONTENT OUTLINE
Subject Area
Number of Items
Grounding an Bonding 4
Conductors 4
Electrical Power Conditioning 2
Electrical and Electronic Knowledge 6
General Low Voltage 3
Sound and Video Systems 5
Intrusion Detection and Alarms 4
Fire Detection and Alarms 7
Computer and Data Systems 5
CCTV Systems 2
Testing Equipment 2
CATV and MATV Systems 2
Applied Systems Design 4
REFERENCE LIST
The reference materials listed below were used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed. This examination is OPEN BOOK.
The following reference material is allowed in the examination center.
Contact
: Contractor School Online to order the manuals you may need with correct author and year.
1. National Electrical Code
2. National Fire Alarm Code
3. Low Voltage Wiring: Security/Fire Alarm Systems
4. Telecommunications Wiring
5. Understanding and Servicing Alarm Systems
6. Live Sound Reinforcement: A Comprehensive Guide to P.A. and Music, Reinforcement Systems and Technology
7. Antenna Toolkit
8. Data, Voice, and Video Cabing
THESE REFERENCES WILL NOT BE AVAILABLE IN THE EXAMINATION CENTER.
MARINE CONSTRUCTION CONTRACTOR
Number of Questions
Minimum Passing Score
Time Allowed
50 70% (35 correct) 150 Minutes
CONTENT OUTLINE
Subject Area Number of Items
Safety 6
Miscellaneous Engineering – Pile Driving 25
Concrete 15
Concrete - Reinforcing Steel 4
REFERENCE LIST
The reference materials listed below were used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed. This examination is OPEN BOOK.
The following reference material is allowed in the examination center.
Contact
: Contractor School Online to order the manuals you may need with correct author and year.
1. Federal Regulations
2. Construction Planning, Equipment, and Methods
3. Concrete Mixtures
4. Reinforcing Bars, Recommended Practices
THESE REFERENCES WILL NOT BE AVAILABLE IN THE EXAMINATION CENTER.
MASONRY CONTRACTOR
Number of Questions
Minimum Passing Score
Time Allowed
60 70% (42 correct) 180 Minutes
CONTENT OUTLINE
Subject Area
Number of Items
Estimating and Plan Reading 4
Unit Masonry 19
Mortar and Grout 16
Accessories 7
Stone 2
Tools 4
Restoration and Cleaning 4
Safety 4
REFERENCE LIST
The reference materials listed below were used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed. This examination is OPEN BOOK.
The following reference material is allowed in the examination center.
Contact
: Contractor School Online to order the manuals you may need with correct author and year.
1. International Building Code
2. Residential Code for One-and-Two-Family Dwellings
3. Federal Regulations
4. Masonry - Brick, Block, Stone
5. Building Code Requirements for Masonry Structures
THESE REFERENCES WILL NOT BE AVAILABLE IN THE EXAMINATION CENTER.
METAL BUILDING ERECTION CONTRACTOR
Number of Questions
Minimum Passing Score
Time Allowed
40 70% (28 correct) 120 Minutes
CONTENT OUTLINE
Subject Area
Number of Items
Sitework 3
Concrete 4
Concrete - Formwork 4
Concrete - Reinforcement 4
Masonry 4
Metal – Structural Framing 10
Insulation 3
Metal – Siding and Roofing 4
Safety 4
REFERENCE LIST
The reference materials listed below were used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed. This examination is OPEN BOOK.
The following reference material is allowed in the examination center.
Contact
: Contractor School Online to order the manuals you may need with correct author and year.
1. International Building Code
2. Residential Code for One-and-Two-Family Dwellings
3. Federal Regulations
4. Low Rise Building Systems
5. Specification for Installation of Steel Framing Members to Receive Screw-Attached Gypsum Panel Products
6. Specification for Installation of Load Bearing (Transverse and Axial) Steel Studs and Related Accessories
7. Concrete Construction
THESE REFERENCES WILL NOT BE AVAILABLE IN THE EXAMINATION CENTER.
METAL STUD AND DRYWALL CONTRACTOR
Number of Questions
Minimum Passing Score
Time Allowed
40 70% (28 correct) 120 Minutes
CONTENT OUTLINE
Subject Area
Number of Items
Estimating and Plan Reading 6
Materials and Installation 19
Taping 4
Special Applications 6
Safety 5
REFERENCE LIST
The reference materials listed below were used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed. This examination is OPEN BOOK.
The following reference material is allowed in the examination center.
Contact
: Contractor School Online to order the manuals you may need with correct author and year.
1. Federal Regulations
2. International Building Code
3. Residential Code for One-and-Two-Family Dwellings
4. Gypsum Construction
THESE REFERENCES WILL NOT BE AVAILABLE IN THE EXAMINATION CENTER.
MILLWORK AND FINISH CARPENTRY
Number of Questions
Minimum Passing Score
Time Allowed
30 70% (21 correct) 90 Minutes
CONTENT OUTLINE
Subject Area
Number of Items
Fabrication 6
Installation 5
Materials 5
Finishing 4
Hand Tools 3
Safety 3
Machines 2
Plans and Estimating 2
REFERENCE LIST
The reference materials listed below were used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed. This examination is OPEN BOOK.
The following reference material is allowed in the examination center.
Contact
: Contractor School Online to order the manuals you may need with correct author and year.
1. Federal Regulations
2. Finish Carpenter's/Carpentry
3. Guide to Furniture and Cabinet Construction
THESE REFERENCES WILL NOT BE AVAILABLE IN THE EXAMINATION CENTER.
MUNICIPAL AND UTILITY
Number of Questions
Minimum Passing Score
Time Allowed
90 70 (63 correct) 220 Minutes
CONTENT OUTLINE
Subject Area
Number of Items
Excavation and Grading 6
Electrical Power Distribution 10
Fuel Distribution 12
Swimming Pools 4
Concrete and Concrete Reinforcement 12
Shotcrete and Gunite 4
Water and Sewer Piping 15
Communication Systems 5
Boring and Tunneling 4
Erosion and Sedimentation Control 2
Safety 8
Alabama Dig Safely 2
Welding 6
REFERENCE LIST
The reference materials listed below were used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed. This examination is OPEN BOOK.
The following reference material is allowed in the examination center.
Contact
: Contractor School Online to order the manuals you may need with correct author and year.
1. Federal Regulations
2. Installation of Aboveground Storage Systems for Motor Vehicle Refueling
3. Procedure for Testing Electrical Continuity of Fuel-Dispensing Hanging Hardware
4. Pressure Piping - Gas Transmission and Distribution Piping Systems
5. National Electrical Safety Code
6. Lineman's and Cableman's Book
7. Ductile Iron Pipe
8. Concrete Pipe & Box Culvert
9. Pipe and Excavation Contracting
10. Jacked Tunnel Design and Construction
11. Guidelines for the Erection of Pre-Cast Concrete Products
12. Welding
13. Concrete Mixtures
14. Shotcrete
15. Storm Water Management for Construction Activities
16. Alabama Dig Safely
17. Certified Pool-Spa Operators
THESE REFERENCES WILL NOT BE AVAILABLE IN THE EXAMINATION CENTER.
OIL AND GAS FIELDS CONTRACTOR
Number of Questions
Minimum Passing Score
Time Allowed
30 70% (21 correct) 120 Minutes
CONTENT OUTLINE
Subject Area
Number of Items
Tanks and Pipelines 12
Miscellaneous Structure/Corrosion Protection 6
Welding 4
Heavy Equipment/Safety 4
Paving and Surfacing 4
REFERENCE LIST
The reference materials listed below were used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed. This examination is OPEN BOOK.
The following reference materials are allowed in the examination center.
Contact
: Contractor School Online to order the manuals you may need with correct author and year.
1. Federal Regulations
2. 49 CFR (Transportation)
3. Rigging for Construction and Industrial Operations
4. Hot-Mix Asphalt Paving
5. Welding
6. Pipe and Excavation Contracting
7. Construction of Large, Welded, Low-Pressure Storage Tanks
8. Welded Steel Tanks for Oil Storage
THESE REFERENCES WILL NOT BE AVAILABLE IN THE EXAMINATION CENTER.
PAINTING AND WALL COVERING CONTRACTOR
Number of Questions
Minimum Passing Score
Time Allowed
50 70% (35 correct) 120 Minutes
CONTENT OUTLINE
Subject Area
Number of Items
General Knowledge 16
Materials and Application 18
Wall Coverings 6
Safety and Employee Protection 10
REFERENCE LIST
The reference materials listed below were used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed. This examination is OPEN BOOK.
The following reference materials are allowed in the examination center.
Contact
: Contractor School Online to order the manuals you may need with correct author and year.
1. Federal Regulations
2. Painting & Decorating
3. Painting and Decorating: Skills and Techniques
THESE REFERENCES WILL NOT BE AVAILABLE IN THE EXAMINATION CENTER.
PIPELINES CONTRACTOR
Number of Questions
Minimum Passing Score
Time Allowed
60 70% (42 correct) 150 Minutes
CONTENT OUTLINE
Subject Area
Number of Items
Excavation 8
Tank and Vaults 12
Piping, Pumps, and Controls 12
Troubleshooting and Maintenance 2
Safety and Fire Prevention 8
Leak Detection and Monitoring Systems 3
Erosion and Sedimentation Control 3
Alabama Dig Safely 3
Estimating (different than clone) 2
Survey and Layout (different than clone) 1
Gas 6
REFERENCE LIST
The reference materials listed below were used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed. This examination is OPEN BOOK.
The following reference materials are allowed in the examination center.
Contact
: Contractor School Online to order the manuals you may need with correct author and year.
1. Federal Regulations
2. Alabama Dig Safely
3. Storm Water Management for Construction Activities
4. Combustible Liquids Code
5. Motor Fuel Dispensing Facilities and Repair Garages
6. Installation of Underground Liquid Storage Systems
7. Installation of Aboveground Storage Systems for Motor Vehicle Refueling
8. Electrical Continuity of Fuel-Dispensing Hanging Hardware
9. Pressure Piping - Gas Transmission and Distribution Piping Systems
10. Pipe and Excavation Contracting
11. Definitive dictionary of terms used in petroleum marketing operations
THESE REFERENCES WILL NOT BE AVAILABLE IN THE EXAMINATION CENTER.
PRE-CAST AND PRE-STRESSED CONCRETE CONTRACTOR
Number of Questions
Minimum Passing Score
Time Allowed
50 70% (35 correct) 120 Minutes
CONTENT OUTLINE
Subject Area
Number of Items
Safety 5
Concrete Earthwork 3
Concrete 11
Concrete Reinforcement 9
Concrete Formwork 8
Concrete Cutting 3
Pre-cast Pre-stressed Concrete Erecting 6
Grouting 2
Embeds, Bolting, and Bearing Plates 1
Alabama Dig Safely 2
REFERENCE LIST
The reference materials listed below were used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed. This examination is OPEN BOOK.
The following reference materials are allowed in the examination center.
Contact
: Contractor School Online to order the manuals you may need with correct author and year.
1. Federal Regulations
2. International Building Code
3. Alabama Dig Safely
4. Formwork for Concrete
5. Concrete Mixtures
6. Saw-cutting Joints in Concrete
7. Saw-cutting Concrete Flatwork
8. Taking the Tedium Out of Cutting
9. Tips for Cutting Concrete
10. Guidelines for the Erection of Pre-Cast Concrete Products
11. Reinforcing Bars, Recommended Practices
THESE REFERENCES WILL NOT BE AVAILABLE IN THE EXAMINATION CENTER.
POWER PROJECTS AND PLANTS CONTRACTOR
Number of Questions
Minimum Passing Score
Time Allowed
50 70% (35 correct) 120 Minutes
CONTENT OUTLINE
Subject Area
Number of Items
Transformers 6
Electrical Knowledge 6
Conductors 8
Overhead Lines 5
Underground Lines 3
Equipment and Safety 10
Grounding Methods 4
Service Drops and Laterals 2
Poles and Structures 3
Electric Supply Stations 3
REFERENCE LIST
The reference materials listed below were used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed. This examination is OPEN BOOK.
The following reference materials are allowed in the examination center.
Contact
: Contractor School Online to order the manuals you may need with correct author and year.
1. Federal Regulations
2. National Electrical Safety Code
3. Lineman's and Cableman's Book
4. National Electrical Code
5. Electricians Book
THESE REFERENCES WILL NOT BE AVAILABLE IN THE EXAMINATION CENTER.
REMODELING, ALTERATION, AND MAINTENANCE CONTRACTOR
Number of Questions
Minimum Passing Score
Time Allowed
60 70% (42 correct) 120 Minutes
CONTENT OUTLINE
Subject Area
Number of Items
Safety 6
Windows and Doors 3
Rough Carpentry 16
Finish Carpentry 16
Siding 3
Drywall 2
Concrete 7
Masonry 7
REFERENCE LIST
The reference material listed below was used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed. This examination is OPEN BOOK.
The following reference materials are allowed in the examination center.
Contact
: Contractor School Online to order the manuals you may need with correct author and year.
1. Federal Regulations
2. Carpentry and Building Construction
3. Finish Carpentry
4. International Building Code
5. Concrete Mixtures
6. Masonry - Brick, Block, Stone
7. Guide to Furniture and Cabinet Construction
THESE REFERENCES WILL NOT BE AVAILABLE IN THE EXAMINATION CENTER.
ROOFING AND SHEET METAL CONTRACTOR
Number of Questions
Minimum Passing Score
Time Allowed
60 70% (42 correct) 150 Minutes
CONTENT OUTLINE
Subject Area
Number of Items
Estimating and Plan Reading 10
Surface Preparation and Planning 8
Steep and Low Slope Roofing, including BUR. 10
Waterproofing 27
Roofing Components 9
Safety 6
REFERENCE LIST
The reference materials listed below were used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed. This examination is OPEN BOOK.
The following reference material is allowed in the examination center.
Contact
: Contractor School Online to order the manuals you may need with correct author and year.
1. Federal Regulations
2. International Building Code
3. Residential Code for One-and-Two-Family Dwellings
4. Roofing Construction and Estimating
5. Roofing Steep Slope Roof Systems
6. Roofing Membrane Roofing Systems
THESE REFERENCES WILL NOT BE AVAILABLE IN THE EXAMINATION CENTER.
RUNWAY CONTRACTOR
Number of Questions
Minimum Passing Score
Time Allowed
30 70% (21 correct) 75 Minutes
CONTENT OUTLINE
Subject Area
Number of Items
Sitework 10
Runways 15
FAA Regulations 3
Lighting 2
REFERENCE LIST
The reference materials listed below were used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed. This examination is OPEN BOOK.
The following reference material is allowed in the examination center.
|